Why single-core cable is not allowed to penetrate into the steel pipe
The stress pipe is designed to eliminate stresses and reduce stress concentration for a variety of cable terminations and high voltage connections and can be reduced from several hundred volts to any voltage
Simple barrier installation is simple, the general is fixed, connected to the power like
Daozha marked expansion bolt can be fixed, the wiring depends on what kind of equipment you use, to achieve what a request, that will be able to determine the number of lines that need to connect the equipment! Simply install a barrier, then a power cord connected to the bargain controller, and then the gate is fixed, the general barrier has a remote control to control the normal work!
One, positioning: in the heart to determine its installation location, if possible, painted in the scene; Second, the wiring: the location set down, find the power position and manual control of the location of the barrier, the two positions to the barrier of the distance selection To facilitate the construction of the line, began to harbor cable truncated pipe, the line into the tube inside, it is best to stay more than one spare line, for 4 core available 5 core or 6 core; three, buried sense coil: Automatic bar, then you need to drop the position of the bar as a center cut a 2 meters by 0.8 meters of the rectangular trunking, the sense of the line buried in the inside to go. Four, the installation: the barrier fixed, the line connected, and then about how wide the intersection, the cut of the long brake bar loaded up, manually shake the rod down try; power debugging; five, after debugging to dig The trunnion is sealed with cement! If you need to use a computer or control panel to control the barrier, then it is necessary to decide according to the situation!
