Mine is a 17 inch TCL LCD display. I switched the resolution to 1024 by 768 (recommended configuration), but I seem to have a particularly large font on the screen. If the resolution is higher, it doesn't seem very harmonious
17 LCD recommended resolution is not 1024*768, you can tune into 1280*1024, such a resolution is the best resolution of 17 LCD, although the font looks a little small, do not worry, you can tune it up. Right click on the desktop - properties - appearance - effect, click the "use big icon", OK, return, and then point higher, will be inside the font into their favorite size, the icon spacing can also be transferred here.
If it is a liquid crystal, the highest resolution is the best resolution, such as CRT, 17 inches recommended resolution is 1024*768, professional level can be adjusted to 1280*1024 or higher. Under the resolution of 1024*768 image, although larger, but not full screen browsing the web, need to drag around, can change the value of DPI in the advanced options to display a custom attribute (system disk), or view a small font selection in a web page, or use the 1280*1024 resolution.
Liquid crystal display and common CRT, must work is the best effect in the best resolution, the best resolution 17 inch display is 1024X768 yes, you think big font may be your personal feeling, and if you really feel uncomfortable if you can in the "desktop" - "properties" - "appearance" - "senior" - "project" by modifying your need to change the font size of the project. Remember to save the changes before you save them
17 inches 16:10 LCD display. The best resolution is: 1440 * 900 (instructions and packing details).17 inches 16:9 LCD display. The best resolution is: 1366 * 768 (instructions and packing details).17 inch 4:3 and 5:4 liquid crystal display. The best resolution is: 1280 * 1024 (instructions and packing details).LCD (liquid crystal display) resolution is different from CRT (cathode ray tube) display, due to the influence of the number of actual cell LCD in liquid crystal layer, a fixed value (i.e., point-to-point display), generally can not be adjusted, is set by the manufacturer and the provisions. LCD LCD displays the best image effect only at this fixed value.The LCD display will appear in the following two ways when presenting a display mode with non optimal resolution:* the first is centered display.For example, when you want to display SVGA800 * 600 resolution on a XGA1024 * 768 screen, only 1024 pixels in the center of the 800 and 768 in the center of the 600 can be displayed. Other pixels and cables that are not rendered have to remain dark. The whole picture looks as if the image is centered, shrinking, and surrounded by shadows.* second for extended display.The advantage is that no matter what the resolution is, the image will be applied to every pixel on the screen without shadow edges. However, as the image is extended to every pixel on the screen, the image is inevitably distorted and the clarity and accuracy are affected.The above two modes will have a very negative impact on the display of the display image, so that the quality of display is greatly reduced, so it is not recommended to transfer LCD to non optimal resolution. If some people started using liquid crystal display, do not adapt to the best resolution, think small word, in the mouse "desktop right operating system display / attribute / appearance / Senior", the "project" to increase the font.
