1 green wire, 1 black with red stripe wire
1999 Dodge Durango Car Radio Wiring Diagram Car Radio Battery Constant 12v+ Wire: Red/Blue Car Radio Accessory Switched 12v+ Wire: Red/White Car Radio Ground Wire: N/A Car Radio Illumination Wire: Black/Yellow Car Stereo Dimmer Wire: Orange Car Stereo Antenna Trigger Wire: N/A Car Stereo Amp Trigger Wire: Green Car Stereo Amplifier Location: N/A Car Audio Front Speakers Size: 6 1/2″ Car Audio Front Speakers Location: Doors Left Front Speaker Positive Wire (+): Dark Green Left Front Speaker Negative Wire (-): Brown/Red Right Front Speaker Positive Wire (+): Brown/Yellow Right Front Speaker Negative Wire (-): Brown/Light Blue Car Audio Rear Speakers Size: 6 1/2″ Car Audio Rear Speakers Location: Rear Doors Left Rear Speaker Positive Wire (+): White Left Rear Speaker Negative Wire (-): Dark Blue/Red Right Rear Speaker Positive Wire (+): Brown/White Right Rear Speaker Negative Wire (-): Brown/Orange
Green wire = positive Black with red tracer = negative
The ground (secondary circuit) is the wire hooked to the car chassie or metal frame from the - terminal marked on the speaker.The hot wire coming from the stereo speaker terminal is to be connected to the + on the speaker terminal.With a volt meter test for power to determine the hot wire.Never guess which one is hot.
Take a AA battery and put the green to positive and black to negative. if speaker pops out a lil thats the correct way. If speaker goes in, its the oppisite way (meaning black would be pos. and not neg) but normally in cars, Black is NEG. I don't have a book and i'm at school with the site i need to look your info up blocked. I google it and it won't even let me google. sorry
For the best answers, search on this site https://shorturl.im/awI5v try looking on the box the signal is coming from to see if it states it there, black is usually negative and red is positive but could differ if you simply reversed it at the source. if you are using RCAs, then it has been done for you and you do not have to worry about polarity. hooking up speakers backwards do not harm it, it just starts it out of sync. when speakers play, they either start from going out to in or in to out (the vibrations from the cone). as long as all the speakers in the system are doing the same thing, you will not hear a difference. if it sounds funny, reverse the wires. speakers use AC electricity so there is not much consequence for wiring it in reverse. DC electricity (like a battery) is picky (via the flash or spark if wires are in incorrectly). thayt is also why on some devices that use outlets do not care which way they are plugged in since it is AC. hope this kind of helps. try to find directions for your particular home reciever if all else fails or try to look the company up and call them directly to see if they can help.
