Home > categories > Mechanical Parts & Fabrication Services > Pipe Fittings > 2000 mercury mountaineer having problems with the power locks?
Question:

2000 mercury mountaineer having problems with the power locks?

i just bought this suv and i new there were a few things that needed to be fixed. But i cant figure out why the power locks wont work right on the back passenger door and the back hatch they work fine but on both front doors you have to unlock them by hand and the back drivers side wont unlock at all dose anyone have any ideas on how i can figure out what the problem is?? your help is greatly appreciated

Answer:

hard factor. lookup into a search engine. just that might help!
This It's /perfect/! And if you don't wanna read, look at the pictures! Anyways, hope I helped :)
I went to Mexico City for the first time back in April of this year. I stayed for a week and encountered no problems. I brought a digi cam and other things, not only that I wore the clothing I usually wear back home. I would change dollars for pesos at an american airport before going to Mexico. Here are some tips that might relieve your fearsat least about Mexico City: 1. Know where your embassy is just in case something happens.(The U.S. Embassy is located by the Angel of Independence Reforma area) 2. Mexico City is a very large city. Know where you're going and it would be better if you travel with at least one person who knows the city well. 3.If you get lost, do not be afraid to ask for helpeven a totally random person can help. 4.Consider using a combination of public transportation. The underground trains would be best and a lot faster. 5.Be mindful of signs; many of them are written in english. The churches dont allow flash photography. If you want to snap a photo of something very important, ask for permission first.
The proper way to connect would be to use schedule 80 pipe and fittings, with blue or hot glue. When using threaded joints, Teflon tape is OK, but I also use a pipe joint compound( pipe dope). This will ensure that there are no leaks. You should also install a union somewhere close to this joint, that way, you can access into the pipe system, if you need to! Good luck to you!

Share to: