350 concrete mixer contactor circuit wiring method
Most of the interlocking connection between the button and the contactor, the static electric shock interlock, that is to say it is transferred by the reverse button no reaction, mainly on the contactor normally open and normally closed contact is transferred to the exchange, through the normally closed contact reversal contactor control line reversal after normally closed the contact is transferred, pay attention to the wiring package power line can be maintained
The contactor is the principle, there is a 24V or 220V can coil and 380V, which is on the above A1 and below A2 connected 220V 101 fire on the line, this is the 220 signal to the thermostat to AC contactor coil operating AC contactor, air switch above the 380V conduction on the line.
Between the button and the contactor dynamic shock interlock, that is to say it is transferred by the reverse button no reaction, mainly on the contactor normally open and normally closed contact is transferred to the exchange, through the normally closed contact reversal contactor control line, reverse after a normally closed contact is transferred, pay attention to the wiring the power line can keep the package.Can 24V or 220V coil and 380V, which is on the above A1 and below A2 connected 220V 101 fire on the line, this is the 220 signal to the thermostat to AC contactor, AC contactor coil actuation, the air above the 380V conduction switch.A concrete mixer is a machine that mixes cement, sand, aggregate and water and mixes them into concrete mixtures. The utility model is mainly composed of a mixing barrel, a feeding and discharging mechanism, a water supply system, a prime mover, a transmission mechanism, a frame and a support device, etc..
