Acceptance criteria for artificial turf construction and matters needing attention
After paving, sod the fold on the part of the selection of cutting knife mouth, docking, overlap, and then link with the glue, adhesive has been completed, all brush grass machine for processing, all the handstand comb grass line up. So far all process is completed
The universal uniform glue scraping in connection with, then on both sides of the turf split, adhesion in connection with, with a rubber hammer beat, in close connection with the part of the adhesive, after the turf of basic assembled again pull to determine the exact location of the function point line, start packing
The green grass with the joints lap proper distance, cuts the grass pushing knives disconnected from the center of the joint, is on both sides of the iron, as far as possible compact lap, then prune, the connecting point is along the seams in the turf roll out, placed under the grass, try to make the seams of turf in connection with the central
Acceptance procedures: calibration of field planeness and slope, the unqualified part is modified. The control data inspection and acceptance by the construction unit with the completion data. Construction plan, audit and report to the owners
Foundation acceptance: Based Cement commonly used cast-in-place concrete or asphalt, has a certain strength and stability. Do not crack and peeling caused by freezing or sand. Based flatness, 3M ruler error less than 4 mm, with a certain slope, generally three percent percent to five, in order to facilitate the rain drainage. Then the frozen regions should adopt anti freezing technology, generally with a layer of geotextile between asphalt layer and gravel layer to buffer, special treatment of water based along the groove
