Question:

How is artificial grass installed

How is artificial grass installed

Answer:

It is easy to install artificial grass. However, with some useful tips we can make the artificial grass in a better condition. For example, when we finish the operation of bonding but before quartz sand and rubber granules, it is a good way to used imported cleaner to clean the the grass cutting pieces in the sites.
It is wrong to think that glue, bonding and pressure are entirely answers of how is artificial grass installed. The last step is curing. Generally, the curing time is three days and the final strength test for ten days. We should pay attention to the protection of artificial grass during the curing time, like avoid the exposure, water immersion and moving.
How is artificial grass installed? Well, it cannot leave the part called pressure. After bonding, we should remove the sundry of surface. Then, use the special rubber hammer to hammer out the stick it to both sides, make good contact with the surface to close-grained, which can help adhesive firmer. When we finish the pressure, we also finish the installation of artificial grass.
Bonding also is an important part of install artificial grass. Bonding should according to the practical conditions, such as temperature, humidity, air pressure and control the drying time in a reasonable range. Generally, when we touch the glue with hand, it will not be paste in our hand, and then it is ok. Bonding must be finish in one time rather than move back and forth the artificial grass after bonding.
Artificial grass is playing more and more important role in our life. But do you know how is artificial grass installed? Well, the first step is glue.It asked to use glue in the surface coating thickness uniformity, but cannot glue it repeatedly or it will appear foaming phenomenon, or even fall. And we should strictly control the thickness of the glue and note to glue in the appropriate speed.

Share to: