And the cut-off valve is not the general name of gate valve and butterfly valve?What are the signs of differentiation?How about the use?
When the valve is opened, the opening height of the valve is 25% to 30% of the nominal diameter, the flow has reached the maximum, which means that the valve has reached full open position, so the opening position of the stop valve should be determined by the stroke of the discThe cut-off valve has the following advantages:The utility model has the advantages of simple structure and convenient manufacture and maintenanceSmall travel time, short opening and closing timeGood sealing, friction between the sealing surface of small, long lifeThe disadvantages of the cut-off valve are as follows:The resistance of fluid is large, and the force required for opening and closing is largerNot suitable for medium with particle, viscosity and easy cokingPoor regulation performanceType valve stem according to the position of divided threaded screw type, internal thread. Divided by the flow of media, there are straight through, DC type and angle type. Divided by the form of valve seal, a packing seal bellows seal valves and valve.The installation and maintenance of the cut-off valve shall pay attention to the following matters:The stop valve operated by the handwheel and handle can be installed in any position of the pipeHand wheel, handle and steering mechanism are not allowed to be used for liftingThe flow direction of the medium shall be in accordance with the arrow shown in the valve body
