Do blister cupboard door plank basic key point
3, blister door surface treatmentSurface treatment is related to the overall image of the finished blister board. If the orange peel phenomenon is serious, the whole door panel looks darker (orange peel refraction light), and the high light blister door panel is very obvious on this point.4, blister door work problemsThis is the easiest problem to cause trouble during use. Mainly manifested in the adsorption edges, if this piece of plastic glue phenomenon, the cabinet door in the process of using water absorption may occur deformation and cracking problem of PVC peridiolum itself. The choice can be used with some force to pull the fingernails PVC film and sheet sticking part, good workmanship (including gum and sticking glue good) plastic plate does not appear with little strength to pull down the phenomenon.
2, quality identification method peridiolumPeridiolum quality directly decides the quality and performance of the finished plastic door. Blister film good to reach a certain thickness, peridiolum gum uniform, stable color. If the thickness of PVC film is low in pressure corner will produce white phenomenon and orange surface phenomenon, some manufacturers in order to deal with these two phenomena reduce the plastic machine pressure, which reduces the formation and deformation of plate problems to a certain extent, but can not guarantee PVC membrane and substrate sticky pressure firmness. The main problem is the uneven peridiolum Beijiao PVC membranes and the substrate can not be normal blood pressure, PVC membrane itself can not pass the glue plastic machine and the substrate in the production of blood pressure, must be in the back of the roll coating glue, called gum, gum is uniform or not, directly affect the quality of both PVC and peridiolum the substrate between the viscous pressure. Color is a problem of finished plastic plate is the most attractive, yellowing is an inevitable problem, but the stability of PVC surface texture and color is to ensure the normal use or in the cleaning process is likely to fade problem.
1, substrate quality identification methodThe quality of the substrate determines whether the cabinet door panel has the ability to eat two times, the nail holding ability and the deformation degree of the finished product blister board and the environmental protection performance of the product blister board. Plastic door material good in density and common substrate are different, the best way is to select the resolution of small plate of the same size, it can be said, the relatively high density plastic door nail holding ability will be better, also small deformation.
