Home > categories > Machinery & Equipment > Forklifts > Battery lift truck charging requirement
Question:

Battery lift truck charging requirement

Battery lift truck charging requirement

Answer:

Different types of charging machine output parameters are different, and the method should follow the instructions of the charging machine. The electric forklift truck. The wire and socket should be checked before electricity is damaged. If any damage is found, it should be repaired and replaced before recharging. 3, check whether the battery is intact and wiring are in good condition, and open the charging flap, observe the electrolyte is in accordance with the provisions of the liquid level height, add distilled water when necessary, the injection liquid level higher than protective piece of 15 to 20 mm advisable.
Different types of charging machine output parameters are different, and the method should follow the instructions of the charging machine. The electric forklift truck. The wire and socket should be checked before electricity is damaged. If any damage is found, it should be repaired and replaced before recharging. 3, check whether the battery is intact and wiring are in good condition, and open the charging flap, observe the electrolyte is in accordance with the provisions of the liquid level height, add distilled water when necessary, the injection liquid level higher than protective piece of 15 to 20 mm advisable.
The battery produces a gas during the charging process and should be kept well ventilated and there is no open fire. 4, in any case, in the process of charging the electrolyte temperature should not exceed 45 ℃, otherwise should try to cool down, such as to reduce the charging current, measures such as artificial cooling or pause charge, after waiting for the temperature drop charge again. It is strictly forbidden to put metal tools on the battery. There is no excess clutter on the battery.
Charge note Do not unplug or turn off the power switch when charging, otherwise the plug and the electrical component will be damaged. When the charging authority is closed, the plug is removed. The truck. When configuring the electrolyte, do not pour water into sulfuric acid, lest the temperature of the liquid surface suddenly rise, and the boiling acid droplets will hurl

Share to: