Brief introduction of honeycomb ceramics
Honeycomb ceramics can be made from a variety of materials. The main materials are: cordierite, mullite, aluminum titanate, activated carbon, silicon carbide, activated alumina, zirconium oxide, silicon nitride and cordierite, mullite, cordierite, aluminum titanate and other composite matrix. Activated carbon powder or granules made of ceramic honeycomb shape, greatly improve the treatment of water purification and wastewater treatment ability, especially in the pharmaceutical industry, antibiotics, vitamins, hormones and nucleic acid injection of various drugs such as injection, dehydration and decolorization to impurities etc.. Honeycomb ceramic can be divided into four categories: regenerator, filler, catalyst carrier and filter material. Ceramic honeycomb regenerative body heat capacity above 1000kJ/kg products, the highest use temperature more than 1700 DEG C, in heating furnace, heating device, soaking furnace, cracking furnace kiln fuel can be saved more than 40%, the yield increased by more than 15%, the temperature of exhaust gas is lower than 150 DEG C. Honeycomb ceramic filler filler than other shapes of greater surface area, better strength and other advantages, can make the vapor-liquid distribution more uniform, the bed resistance is reduced, the effect is better, and can prolong the service life, in the petrochemical, pharmaceutical and fine chemical industry as a filler effect is quite good.
