Brief introduction of magnetic separator
Magnetic separator is also called magnet filter, magnetic separator, magnetic filter, magnetic roller separator and so on. It is widely used in the separation and adsorption of impurities in the coolant of grinding machines. In coating, phosphating, cold rolling and other industries have also been applied. The magnetic separator is the most small, generally 25L/min of flow, large magnetic separator can arrive4500L/min (excluding chain bar filter). The magnetic separator can effectively remove the iron in the cooling liquid without filtering material consumption. It is easy to install, and can be used in combination with other types of filters, such as drum (roller) tape filter, flat screen tape filter, vacuum negative pressure paper tape filter, etc.. The cooling liquid consumption can be reduced, and the service life of the cooling pump can be increased. The Ra value of the surface quality of the workpiece can be increased by 2 stages.
The magnetic separator is used for grinding and other machine tool coolant (cutting oil or emulsion) purification, mainly used for automatic separation of the ferromagnetic materials, keep cutting fluid clean, improve the processing performance and tool life, reduce the pollution of the environment. Separator drum with a strong magnetic force, the machine tool cutting fluid (oil, water) in the ferromagnetic chip and debris separation, automatic separation. Thereby, the quality of the processed products is improved, the cost is reduced, and the production efficiency is improved.Most of the applications of iron magnetic separators are in the separation of crushed materials. The main market facing magnetic separator is lathe, grinding machine, planer, etc. in the process of machining, the separation of broken materials, industrial waste and chemical intermediate products can be used in the process of iron selection. With the increasing use of aluminum on the market, the inevitable increase in the number of aluminum pins, the existence of iron can not be rational use, at this time it will need a magnetic separator separation. There are many requirements for refining copper powder and non-ferrous metals.
Magnetic separators are used for the purification of grinding machines (coolants or emulsions) of grinders and other machine tools. The iron filings in the coolant are sucked out through the magnetic drum of the separator to keep the coolant clean. The use of magnetic separator can reduce the number of grinding wheel correction, improve the surface smoothness of the workpiece, and prolong the service life of the grinding wheel and coolant.
