Broken bridge aluminum screens how to go up
The first step: the yarn box, air slot, bottom assembled, and then use six screws to twist it to make it a square box. The second step: the screen on the installation site, pay attention to the left and right air duct and the door window frame to the left and right symmetry, bottom position from the door frame frame to be about 5cm lower, put the left and right with the clip, Doors and windows so that they can not move. The third step: with electric drill with 3.2mm drill bit in the door window frame inside the puncture. Step 4: According to the need in the left and right air trough and below the bottom of the corresponding place marked with 6 to 14 eyes, and then screw the screw is installed. Installation Notes: 1, the yarn box to be vertical fixed, broken bridge aluminum doors and windows at both ends to occupy the upper and lower border prevail. 2, up and down the slide with the location of the parallel box fixed, to avoid skid inside and outside skew. 3, the base position to close the pull beam, placed in the sliding window swoop to close and then draw lines and fixed, so as not to fixed position too far or too far. 4, if the parts of the fixed nail is too long, will prevent the normal sliding sliding window slick, broken bridge aluminum doors and windows can be self-nail with a shears cut short can be.
There is a hand drill, to fix the screw 1
First of all say that the broken bridge aluminum windows are generally suitable for shampoo style, removable wash screens, box frame window, anti-theft screens can be, mainly to see what your needs, such as your family has children, For example, if you want to install a line of sight is good, you can go to the East * window * network to see if there is a demand in accordance with the demand or choose to meet your needs after the product you want to install this to see you do that section of the screen , Different models of the installation of the screen a little bit different, some models need to install electric transfer, the first to be drilled, unless you can choose a suitable for their own installation of the product, that is, do not need to turn on the installation
