I have a Burnt Valve in my Ford 302 EFI Crown Victoria. I know that i will have to have machine work done to the head but im not even gonna mess around im going to just pull both my heads off since theres alot to remove to even get to the heads i Just need a list of parts that i'm gonna have to buy for this project
You will need a head rebuild kit: valves, valve seats, valve guides and all the seals and gaskets. You will need a valley pan gasket. Leave it to the machine shop to get all the parts that go in the head. I left out valve springs and spacers that may be worn out of spec. If you ever pulled and replaced heads, you have a good idea what you're in for. If this is your first time, get help from someone with experience so you don't end up with a basket case needing to be towed to a shop for assembly. That's a nice engine and you shouldn't try to play cheap fixing it.
take the heads to your local automotive machine shop and have them do the valve job they will fix whats wrong with your heads.and for parts you will need a head set gasket kit from auto zone or summit racing,and new spark plugs wire's oil, antifreeze,belts water pump since you have the room to get to it now,
