Cabinet door how to install cabinet hinge installation steps and precautions
First of all, we should determine the minimum door margin between the cabinet doors to be installed, otherwise, two doors are always "fight", it is unsightly and not practical. The minimum door distance shall be based on the type of hinge, the margin of the hinge cup, and the thickness of the door. For example: the door thickness is 19mm, the hinge cup margin is 4mm, then the minimum door margin is 2mm
With two built-in rotating basket cabinets, and fixed door and door frame, the most important is because of the built-in basket determines the opening angle of it must be very large, so the hinge curvature must be large enough to ensure the free will of door opening to the right angle, easy to take any of the items.
The number of cabinet links should be determined according to the actual installation experiment. The number of hinges used for door panels depends on the width and height of the door panels, the weight of the door panels and the material of the door panels. For example: height of 1500mm, weight of 9-12kg between the door panels, should use 3 hinges.
Open the door by door and side plate on the side position, and the door, the door and the door half embedded three installation method. The door is basically covered by semi cover plate; the door cover half side plate, especially suitable for the middle clapboard, need to install the three door above the cabinet door is arranged on both sides; embedded within the plate.
