The whole cabinet door deformation, how should I do?
The main reason for the deformation of the whole cupboard door:1. drainage pipes installed within the cabinet and sealed after lax or ground in a wet state, resulting in the closet landing wood moisture absorption.2. in the construction of walls, the ground wet, wet floor walls, install hanging cabinet, closet, metope, ground water is from wood-based material absorption.3., decoration materials itself high moisture content.4. wood material can not be distributed by the water at the wall.5. wooden materials against walls are not preserved.
Prevention measures of overall kitchen door deformation:1. install hanging cabinet, closet, on the site, near the wall against the wall and parts of the material should be easy to damp wood preservative brush.2. cabinet, closet as installed in the wall, the moisture absorption of wood materials, water is not easy to distribute, so that the surface within the cabinet of plywood and other wood materials should be painted.3. the interface of the drain pipe in the cabinet should be sealed to prevent water from overflowing. The bucket, sink around the application of sealant sealing, prevent the water overflow of water along the gap into the wood materials.4., decoration materials used moisture content in the South should be controlled below 15%, northern areas or heating areas should be controlled below 12%.5. walls, ground basically after drying, and then install hanging cabinet, closet.
