Cabinet doors closed tightly do not
See if multi-point positioning: Han Han cabinet reminded everyone should try to choose multi-point positioning of the hinge. The so-called multi point positioning, refers to the door can be stopped at any angle in the open time, open not laborious, will not suddenly closed, so as to ensure the safety, which is for the lift type cabinet door is particularly important. The quality of the positioning is related to the toughness of the reeds used in the hardware. The quality of the reeds determines the opening angle of the door panels. The reeds with good quality make the opening angle exceed 90 degrees.
At present, most of the hinges on the market are removable. They are divided into two parts: the base and the buckle. When selecting the cabinet, you can ask the sales staff to remove the door with the hinge card and check the inside of the buckle. Production of steel hinge is very important, if the selection is not good, after a period of time, the door may be laughter, shoulder off angle. Large brands of cabinet hardware, almost all use cold rolled steel, its thickness and toughness are perfect.
Look accessories: hinge must be able to adapt to the kitchen humidity, soot and many other factors, it is good or bad for the normal use of cabinets and life expectancy is critical. The test is the hinge, it not only to accurately Guiti and shutter link up to shutter alone bear the weight of the door and the need to maintain consistency are unchanged, or after a period of time, there will be loose. The whole drawer in the design, the most important component is the slide, because of the kitchen special environment, low quality rail even in the short term feel good, a little longer time will find push and pull difficult phenomenon.
