Camphor pine antiseptic wood sun drying how to deal with oil
3, the eradication of loosening oil on the more local, you can use the blade to eradicate the local, and then smear the mud. Regardless of which method to deal with, you need to use ethanol (alcohol) scrub again or coated with a layer of shellac varnish, in case the pine does not remove the net loose oak, affecting the film.
4, dissolve with 25% acetone solution dissolved, can also be 20% aqueous solution of acetone and a small amount of alkali mixture scrub.
Not easy to do Is Pinus sylvestris? In fact, drying is not a good problem. Now the domestic Pinus sylvestris antisense wood are off. You either change or spoke off the oil After all, the amount of oil is limited, shovel clean after a few times to do more paint, do not use those so-called wood oil, useless, with paint! After the cover can basically solve the problem
Or the local oil out of the place to polish it, and then brush on the point of water seal paint.
This is caused by a forced degreasing drying prior to corrosion protection. Can be done as follows: 1, alkali washing with 8% to 10% of sodium carbonate (edible alkali) aqueous solution, or 4% to 6% of the caustic soda solution, cleaning pine pine oil parts, so that pine oil saponification (oil and Alkali and become soap and glycerin), and then use a sponge or brush dipped in hot water (40 ~ 50 ℃) scrub, rinse.
2, rinse 20 grams of bleach, add water 0.5 kg, to dissolve, with this solution repeatedly painted pine pine oil parts, until a little white, and then washed with water.
