The electric iron can melt copper or aluminum? If the electric iron copper or aluminum soldering. It can weld copper or iron!
They can not be melted. They have a high melting point. Copper is 1083.4 + 0.2 degrees, and aluminium is 660 degrees centigrade
The estimate is out of the question! The power of general electric iron is not big, cannot raise the temperature too high!
Cannot melt. Copper or aluminum has a high melting point. The maximum temperature of the electric iron is below the temperature of molten copper and aluminum.Electric iron: is a necessary tool of electronic production and electrical maintenance, the main purpose is to welding components and lines, according to the mechanical structure can be divided into internal and external heating type electric iron electric iron, which is divided into no tin absorption electric iron and tin suction type electric iron, according to different purposes is divided into large power small power electric iron and iron.Function: electric iron is mainly used in welding machine and wire components, according to the structure can be divided into internal and external heating type electric iron electric iron, can be classified according to the functions and the tin absorbing electric soldering iron with electric soldering iron, according to different purposes is divided into large power and small power electric iron electric iron. The internal electric iron is smaller and cheaper. In general, electronic production uses 20W-30W's internal heating electric iron. Of course, there is a 50W external hot electric soldering iron can be prepared. The heating electric iron has higher heating efficiency, and the replacement of the soldering iron head is more convenientOxygen free copper is a solid copper, solid red, if the copper of a single element is heated, it reacts with oxygen to form copper oxide, that is, oxygen copper, is also solid, black, melting point is 1083 degrees.Aluminum is a silvery white metal with a melting point of 660.4 DEG C, a boiling point of 2467 DEG C, a density of 2.70 g / cm, 3, very light, about 1/4. of iron, its hardness is relatively small, has good ductility, can be drawn into filaments, can also be rolled into aluminum foil.