Can the basin faucet hot and cold water pipe be replaced?
Separate inlet pipes and hoses by saws: Since the faucets in the bathroom are not installed, they can not be separated from the hoses and hoses. At the same time, if the saws are cut directly, the water holes in the saw are re-connected to the new hose A bit difficult.
Yes, the following two tubes removed, go to the hardware store matching on the line, because do not know is the tip of the tube or two
One will be the faucet clenched, not loose, the lower part of the pot will be the end of the wrench stuck in the hose at the end of the screw at the nut, adjust the size to the clamping nut,
A small live wrench, a flashlight, drill into the basin below the table, the body off the table below the pot,
First to the water of the total gate off, and then depends on what kind of faucet, and some in the wash basin under the screw twisted, so the first screw to twist first, there is a more ancient type is directly twist open The beginning of the faucet can be. The interface rust is difficult to remove: the bathroom faucet in the demolition, at least into the water pipe connection is easy to separate. The kitchen, whether it is the water inlet or faucet with the table connection, the two interfaces are difficult to unscrew.
