Can the curtain guide be installed by itself?
Can be very simple, as long as there are tools to have normal hands-on ability, 0K
Tolerable。 The general procedure is as follows, the concrete method needs according to your purchase curtain guide rail carries on.I. positioningThe accuracy of line positioning is related to the success or failure of the curtain installation. First, the distance between the fixed hole and the required installation track is measured.Two. Install curtain rail1, curtain rail has a single, double or three tracks of the points. When the width of the window is greater than 1200mm, the curtain rail should be broken, broken at the simmer, bending, stagger, simmer curve should be gentle curve, lap length of not less than 200mm. The curtain box is usually in an open orbit. Heavy curtain rail should be added screw; dark curtain box should be back to the track. Heavy curtain rail should be encrypted small angle spacing, wood screw specifications of not less than 30mm.2. Fit the lifting clips, turn the clips 90 degrees, connect with the track, and install the lifting clips onto the roof with a self tapping screw. If it is a concrete structure, with expansion screws.Three. Install curtain rod1. Adjust the connecting fixing piece, put the rod or wire on it and fix it on the fixing piece. Make it level and exactly the same as the room.2, the installation of standard curtain track (double track), the basic width of the general should be more than 15CM, single track may be reduced according to the appropriate circumstances.Four. Adjust positionFloor curtains or over the table curtains, installation of track should give rise to the width of the window, to avoid the curtain sagging when blocked and unsightly.Five, pay attention to the paste wallNot hollow, or drilling, veneer easily cracked.
No problem. Just one impact drill and two more bolts
