Can the silicone mold put the oven in?
There are two kinds of silicone rubber mold, a mold made of ordinary rubber is mixed, the other one is made of silicone mold, general rubber mold can also be put in the oven, time not too long, 2 minutes, the temperature is not too high, about 80 degrees. The silicone mold can be heated in an oven. The temperature can be 150 degrees. It can be done 2-3 hours a day. I hope I can help you
Silicone mold is soft, generally used to do, relatively soft and not easy to separate from the mold of dim sum, with more convenient. Silicone type should pay attention to maintenance: silicone mold characteristics: the advantage of silica gel mold is anti sticking, easy to release, and if it is a good silicone mold, the life of silicone mold is about 200 times. The use and maintenance of silicone molds: 1., after the first and every use, with hot water (diluted food detergent) or into the dishwasher clean, do not use abrasive cleaning agent or foam cleaning. Make sure that the silicone cup is thoroughly dried before and after each use. 2. when baking, the silica gel cup shall be split open on a flat baking sheet. Don't let the mold dry roasted, such as a six mode, you just filled with 3 modules, 3 modules must be installed on another in the water. Otherwise, the mold will be broken and the service life will be reduced. In order to make the best baking effect of the finished baking products, a small amount of Nonstick baking oil can be lightly sprayed on the surface of the silica gel Cup before baking. 3., the silicone cup can be heat-resistant to 500 degrees Fahrenheit (260 degrees Celsius), and can withstand transient changes in temperature, such as the cup from the refrigerator directly into the oven. 4. when baking is complete, remove the entire pan from the oven and place the baking product on the rack to be cool until completely cold. 5. silicon school cup can only be used in ovens, ovens and microwave ovens, must not be used directly on gas or electricity, or directly above the heating plate or under the grill. 6 do not use knives or other sharp instruments on the silica gel cup, not pressure, pulling, violence 7 silicone mold (because the electrostatic relationship, it is easy to absorb dust), long time when not in use, the best placed in the box, placed in the shade.
Generally speaking, the aluminum baking mold is better.
