Home > categories > Hydraulic & Pneumatic > Check Valve > Can the slow stop disc check valve close quickly?
Question:

Can the slow stop disc check valve close quickly?

Can the slow stop disc check valve close quickly?

Answer:

At this point, the valve will automatically close under the influence of the spring and the medium return. However, as the piston rod is in an extended position, the valve can not be closed all the way, and there is about 20% of the area left to make the medium pass, so as to eliminate the water hammer. The disc is divided into two parts by the piston, which is fast, slow and slow. It can not only prevent the motor from reversing, but also eliminate the mute effect.
At the same time, the pressure of the inlet medium into the lower part of the piston in the oil cylinder to push the piston, the small end of the upper part of the oil cylinder piston through the needle valve are respectively pressed into both sides of the valve body, the piston rod extends out of the small cylinder. When the pressure of the inlet medium drops below the outlet pressure, the medium will produce a return flow.
Slow closing disc check valve does not turn off quickly."Slow closing" means slow closing and fast closing.The butterfly valve is mainly composed of a valve body, two semicircular discs, a return spring, an oil storage tank, a slowly closing small cylinder set, and a needle valve (a micro regulating valve). The principle relies mainly on the thrust of the imported medium and pushes the two discs smoothly.

Share to: