What is the function of the check valve?
To prevent water flow is generally in the lower position, to prevent the above valve is not closed, the water back into the flow
The function of the check valve is to prevent the medium from flowing back! Check valves, which are commonly known as check valves! Backflow of medium will cause the reverse of pump impeller, which may lead to the burnout of pump! Pumps used in industry are expensive nowadays! Ha-ha！ The check valve just protects the pump and piping!
1. Check valve function: prevent backflow of medium, prevent pump and drive motor reverse, and discharge of container medium.2, check valve refers to rely on the flow of the media itself and automatically open and close the valve, used to prevent the media back of the valve, also known as check valve, one-way valve, counter flow valve, and back pressure valve. The check valve belongs to an automatic valve.3, check valve according to the structure of the division, can be divided into lift check valve, swing check valve and butterfly check valve three:Lift check valve is divided into two types of vertical and horizontal.Swing check valve is divided into single, double valve and multi flap type of three.Butterfly check valve is straight through type.The above types of check valves can be classified into thread connection, flange connection, welding connection and clamp connection in connection forms of four kinds.4, check valve (Check, Valve) installation should pay attention to the following mattersA do not allow the check valve to bear weight in the line, and the large check valve shall be independently supported so as not to be affected by the pressure generated by the piping system.B, when installing, pay attention to the direction of the flow of medium should be in accordance with the direction of the body marked arrow.C and vertical vertical check valves shall be installed on the vertical pipe.D and lift type horizontal check valves shall be installed on horizontal pipes.
