Home > categories > Tools & Accessories > Lifting Sling > Ceiling installation does not allow the use of air nails?
Question:

Ceiling installation does not allow the use of air nails?

Ceiling installation does not allow the use of air nails?

Answer:

Connection of hanging cup, sling and structural layerOperation method: (1) the main consideration connected with embedded parts and transition piece.In the first layer in embedded iron or wood brick (except water brick). The location shall be accurate and adequate adjustment should be made.The transition in the iron and wooden fittings, so as to adjust the mindware error, and mindware nail, screw, welding, wear.The suspender and the sling are connected with the transition connecting piece.
(1) construction materials: common materials are as follows.Wood (different specifications of water, wood, water board), aluminum alloy (plate, profile), steel (steel, flat steel, steel plate), mainly as supporting components.Plastic, plexiglass plate, glass partition plate, outer decorative veneer and heat dissipating plate, copper plate and electrochemical aluminium plate as decorative component.Other accessories such as screws, nails, rivets, finished lamps, adhesives and so on.(2) construction tools: pliers, screwdrivers, hammers, saws, electric hammer, hand according to the curve, a ruler, paint etc..
Installation notes: installation should pay attention to the following three points.When installing, if there are many chandeliers, we should pay attention to their location, length and length, and install the ceiling lamp while installing the ceiling, so that the position and height of the lamp can be adjusted on the basis of the ceiling and joist.The hanger on the ceiling must be made by direct out method and by adding bushing. The method of adding sleeves is good for installation, and it can ensure the integrity of the ceiling panel. The boom that is directly out of the ceiling can not be easily drilled when installing, and sometimes the method of installing the suspender first and cutting the hole of the panel is adopted, but the decorative effect is affected.The boom should have a certain length of thread for adjusting height. Attention should be paid to the reliability of the hanging light box under the suspender and suspender.

Share to:

Hot Tag