Ceramic washbasin bad how to do something leaky
Third, ceramic metal repair technology
The repair agent is easy to use, mainly according to the following five steps:
1. Surface treatment to remove the site of the accumulation of corrosion, with a corner or straight handle grinding machine to be patched parts, the principle is "more rough and better", and finally with acetone or alcohol cleaning degreasing (not allowed to hand touch).
2. Ingredients will base and curing agent in accordance with its ratio poured out on the work board, fully mixed evenly into a dark compound.
3. Paint ① will be equipped with a good compound with a plastic blade scraper evenly coated on the surface of the repair site, scratch the real exhaust bubbles to ensure that the surface with the patch in real contact, 20 - 30 ℃ curing 2 hours.
4. Cured in 20 to 30 ℃ conditions, 3 to 5 hours can be machined, fully cured to take more than 24 hours. Thickness of the coating is high and the cure time can be shortened.
5. Processing can be used to identify the sound beat sound to check the curing effect. The tools used should be cleaned with detergent immediately.
Ceramic metal repair agent in the reactor, tower and other equipment on the use of good results, its simple and practical performance not only for your company to save a lot of manpower and resources, but also brought considerable economic benefits.
Patched
Second, the ceramic metal repair agent (enamel reactor repair agent):
Ceramic alloy glass coating repair agent enamel reactor repair agent (Jin Su Cheng) JS916 is a polymer alloy repair agent, mainly used for glass-lined equipment and parts of the surface lining of the local damage repair. Enamel reactor repair agent repair agent is not only characterized by its high corrosion resistance and corrosion resistance, but also enamel reactor repair agent rapid repair capacity. Enamel reactor repair agent can be almost in the production line of non-stop conditions on the damage to the equipment at room temperature rapid repair. The enamel reactor repair agent is magnetic but not guide, enamel reactor repair agent maximum temperature up to 230 ℃.
A: small cracks or holes can be used glass glue or 502 glue in the dry to keep the case.
Two: large can choose to block with rubber stopper, but not very beautiful.
You should be talking about the enamel pot it, the water directly on the bar, did not have to repair ,,, or use aluminum foil tape stickers about
First it should be checked whether the ceramic washbasin is part of the ceramic crack or broken. If the ceramic part is not obvious cracks or damage, you can check the ceramic basin water leakage part of the use of a long time because of aging, damage, poor airtight. If this is the case, it is very simple to replace the same specifications of the water leakage can be. If the ceramic basin body cracks or damage, you need to repair the basin body. The specific method is as follows:
(1) temporary emergency law. You can use 502 glue, Wan Nengjiao, glass glue, hot plastic gun, and even candles (cracks are very subtle) to fill the cracks, can be applied directly before the solidification, with the tools to clean the surface of the basin can be clean. This method can be temporary emergency use, but the effect is not ideal, often every time the filler again fall off.
(2) professional repair law. Please have a professional repair technology master, the use of metal mosaic repair, the general use of molten metal filled with hot melt into the gap, this situation is often patched very fast, no longer appear water leakage problems, but after repair because of metal and Ceramic color difference, it will be clear that the repair of the place, affecting the appearance.
(3) There is also a way of their own operation, I used to buy, is called the "golden soup does not leak" quick-drying cement, this kind of cement is used for waterproof plugging, a few minutes can be dry. After flooding the basin, with gold soup does not leak smear damaged, so that the soup does not fill into the cracks, play the role of plugging.
Recommendation: the general ceramic basin are double hollow structure, a place often affect the other parts of the water leakage, there is a crack after the force becomes large, until all the cracked the situation. In view of the current ceramic pots of the market price is moderate, it is recommended to buy a new basin to replace.
