Home > categories > Construction & Real Estate > Wash Basin > Ceramic washbasin broken, how to repair
Question:

Ceramic washbasin broken, how to repair

Ceramic washbasin broken, how to repair

Answer:

The repair agent is easy to use, mainly according to the following five steps: 1. Surface treatment to remove the site of the accumulation of corrosion, with a corner or straight handle grinding machine to be patched parts, the principle is "more rough and better", and finally with acetone or alcohol cleaning degreasing (not allowed to hand touch). 2. Ingredients will base and curing agent in accordance with its ratio poured out on the work board, fully mixed evenly into a dark compound. 3. Paint ① will be equipped with a good compound with a plastic blade scraper evenly coated on the surface of the repair site, scratch the real exhaust bubbles to ensure that the surface with the patch in real contact, 20 - 30 ℃ curing 2 hours. 4. Cured in 20 to 30 ℃ conditions, 3 to 5 hours can be machined, fully cured to take more than 24 hours. Thickness of the coating is high and the cure time can be shortened. 5. Processing can be used to identify the sound beat sound to check the curing effect. The tools used should be cleaned with detergent immediately. Ceramic metal repair agent in the reactor, tower and other equipment on the use of good results, its simple and practical performance not only for your company to save a lot of manpower and resources, but also brought considerable economic benefits.
Ceramic alloy glass coating repair agent enamel reactor repair agent (Jin Su Cheng) JS916 is a polymer alloy repair agent, mainly used for glass-lined equipment and parts of the surface lining of the local damage repair. Enamel reactor repair agent repair agent is not only characterized by its high corrosion resistance and corrosion resistance, but also enamel reactor repair agent rapid repair capacity. Enamel reactor repair agent can be almost in the production line of non-stop conditions on the damage to the equipment at room temperature rapid repair. The enamel reactor repair agent is magnetic but not guide, enamel reactor repair agent maximum temperature up to 230 ℃.

Share to: