Cnc84 system drill instruction
CA: clear the process parameters and the location of the tool libraryCLT: clear the process parameters (except the current count B)CLM: clear the location of the tool library and set the current count BCBRK: clear the record of the knife break recordCD: clear the default tool parameter tableCOMM, N: do not drop down to display previously entered commandsT * * *: take a knife (* * * stands for numbers)T: return the knife from the spindle to its original positionP: machine to parking spaceR: the machine moves to the zero of the grating rulerCT M***: forcibly place the knife on the main shaft at the designated tool Bank of the M***H***..***: change the H value of the drilling bitH: spindle bit HZ***.***: change the final drilling bit, i.e., change the drill plate depthM22: the pressure foot rises
Rig G01 straight line G02 G03 clockwise counterclockwise rotation of G04X# retention time variable G32X#Y# clockwise circular hole G33X#Y# clockwise traveling Gong Gong hole G40 closed circular moving cutter compensation G41 tool left G42 cutter offset compensation right offset compensation G81 dual in-line encapsulation type drill
CM: clear the drill fileCA: clear the process parameters and the location of the tool libraryCLT: clear the process parameters (except the current count B)CLM: clear the location of the tool library and set the current count BCBRK: clear the record of the knife break recordCD: clear the default tool parameter tableCOMM, N: do not drop down to display previously entered commandsT * * *: take a knife (* * * stands for numbers)T: return the knife from the spindle to its original positionP: machine to parking spaceR: the machine moves to the zero of the grating rulerCT M***: forcibly place the knife on the main shaft at the designated tool Bank of the M***H***..***: change the H value of the drilling bitH: spindle bit HZ***.***: change the final drilling bit, i.e., change the drill plate depthM22: the pressure foot risesM23: pressure foot downM26: the manipulator risesM27: manipulator downM34: mechanical fingers openM35: mechanical fingers close togetherM36: enter manual change modeFP****: switch the drilling file format (* * * * * * * represents 4205421542204210 of the drilling file formats)FV *: toggle the file quadrant when drilling (1 - 8 quadrants)DMAG*: switch the display quadrant of the tool library (HANS-F6L is DMAG8, that is, the eighth quadrant can not be changed randomly)FAX***.***FAY***.***: enter a zero offset valueFAIX * * * * * * * FAIY * * * * * * * modifies the zero offset value (relative to the original zero position)NOMO: turn off all servo motorsNOMO * *: shutting off servo motors designated by * * * X Y, Z1, Z2, Z3, Z4, Z5, Z6)MO: turn on the servo motor
