Color buckle plate, that is, color coated advertising buckle, how to install it?
Install side keel: according to the requirements of cement in the ceiling height of nail wall around (or percussion drilling) fixed edge of the keel, cement nail spacing is not greater than 300 mm.
Installation of secondary keel: according to the size of the aluminum gusset plate, the installation of secondary keel with the plate, the second keel hanging through the hanging on the main keel. When the keel length needs longer extension, the secondary keel is connected with the relative end head at the same time, and then straightened and fixed at the same time.
After the installation of the main bone: the main keel is generally used C38 or light steel keel keel matching, control the spacing of 1200 mm in the range. When installing, the hanger with the main keel is connected with the suspender.
Installation of the main keel boom: in the play ceiling elevation level and keel line position, determine the lower end of the hanging rod head height, install the pre processed boom, boom installation expansion bolt in the original on the top surface with a diameter of 8mm. The selection of the diameter 8mm of the harness, hanger control the spacing of 1200 mm in the range.
Play horizontal lines at the corners of the room wall, according to the design elevation, with a horizontal line as a benchmark to determine the location and elevation of elastic line ceiling, find the center of the room, and the elevation level along the ceiling of the room, with the center point as the center on the wall painted keel grading line of position.
