Computer radiator copper at (or silicone grease?) Where should I paint it? Where should I paint it besides the CPU?
Is not to distinguish between the silicone grease, the grease is much higher than the thermal conductivity of silica gel, is your red sign, you have the heat pipe radiator off, you will find the chips, grease clean, apply new grease, to a thin layer can be,
In fact, no metal thermal grease, but why use, mainly to fill the radiator with the chip attached to tiny gaps, the radiator and the chip can not be smooth, there are 100% levels, so subtle uneven fill, and the thinner the better grease.
Is the grease. The name "silicone" is also called, but not the same thing. Two red circles are painted. But painted below is to remove the radiator. Apply to the chip. Dark. Smearing grease should be less than. With a grain size in the center, and then press down on the left and right radiator, moving up and down, the uniform distribution of grease diffusion. You can look up to see if it's all covered.
