Considerations for hand held aluminium foil sealing machine
When the induction foil area is too large, press the induction switch, time display immediately to zero without induction or red "overcurrent indicator" flashing with "drop" sound the alarm when the time should be increased by letter and the distance between the sensor head of the post, to the normal work. Can use rubber boards and other things to do the stalls, do not use metal materials instead.
This machine uses the single phase three wire power line, in order to make the operator safety, must use the single-phase three wire system electric outlet, the work place ground must be dry, in order to maintain the insulation.
Should the white glue boards often view the inductive head in front of the color, if there are serious undo charred discoloration, inductive head rib cover to check, whether the induction coil insulation paint carbonization or fall off, if this phenomenon should be replaced or induction coil induction head in a timely manner, so as not to damage the host to continue to use.
1, this machine is not suitable for metal container and metal cap and anodized aluminum paint cover on the metal surface, no heating press button, otherwise it will damage the machine, such as metal cap and anodized aluminum paint cover, aluminum foil can be screwed on the bottle cap.2, this machine is in use, the operator should always pay attention to the temperature sensing head, such as hot hot hand (about 80 DEG C) should stop working for natural cooling or use a fan induction head alignment sensor head forced rapid cooling, the temperature sensing head down to room temperature (25 degrees Celsius) again start to work, so the sensor head of high temperature damage.3, the machine is equipped with automatic overheat protection function, when the internal temperature of overheating, green "overheating" bright lights, you should immediately can continue to work out in the standby light or cooling.
