Density of anti cracking mortar of alkali resistant glass fiber mesh cloth
Alkali resistant fiberglass mesh cutting burr whether super 3M insulation layer with anti crack mortar thickness control 3-5mm immediately with iron. Alkali resistant fiberglass mesh cutting burr whether super 3M insulation layer with anti crack mortar thickness control 3-5mm immediately with alkali resistant fiberglass mesh with iron pressed into the mortar plumpness of mortar should be 100% inner eye.
The bonding width of alkali resistant fiberglass mesh shall be at the edge of 50mm alkali resistant fiberglass mesh cloth. It is strictly prohibited to dry joint and must be embedded with anti cracking mortar.
In the negative corner, the alkali resistant fiberglass mesh shall be pressed with lap joint, its width shall be 50mm; the male corner shall be pressed with stubble; the lap width shall be 150mm; the joint net and the mortar shall be full; the 100% shall be smooth and straight; the verticality of the Yin and Yang angles shall be maintained.
