Design and installation of thrust tapered roller bearings
The same washer with dimensions, coaxial and bearing housing rings has a tapered raceway and a retaining edge. Bearings designed for this purpose are often used in situations of great axial load, such as drilling equipment, turntable or crane hooks. The bearing is provided with a cage and is positioned by two washers. Other designed shaft bearings, tapered raceways and retaining walls, and bearing housings are flat (flat). Therefore, the designed bearings can accept the slight eccentricity of the shaft relative to the bearing box bore without adversely affecting the performance of the bearing. In addition to several sizes with full rollers, this type of bearing has a concentric cage with rollers. Two, two-way thrust tapered roller bearings are mainly used in rolling mills with more than one column roller bearings. This kind of bearing with flat axis gasket is more popular because it can bear the slight eccentricity of the shaft relative to the bore of the bearing box and the slight change of radial internal clearance used by the radial bearing. A spacer sleeve is provided between the two bearing housing rings.
The LYTBZ thrust tapered roller bearing with cage is designed separately so that the two washers and roller and cage thrust assemblies can be easily mounted separately. The full roller screw bearing is fixed together by special positioning parts. In order to simplify the operation, the washer has a threaded hole for lifting the bolt. See below: 1. Small unidirectional thrust tapered roller bearings are used almost exclusively for steering knuckle bearing configurations of commercial vehicles. This kind of bearing has full rollers and is fixed with a thin steel plate. Most of the bearings are made of wear-resistant, oil resistant nitrile butadiene rubber (NBR) friction seals. The bearings are lubricated with versatile grease for lifetime lubrication without maintenance. There are many designs, but the difference is the design of bearing housings and bearing housings. The dimensions of the unidirectional bearing gaskets are different; some bearings, bearings, coaxial and bearing housings have exactly the same size, while others have different designs of bearing gaskets.
