Do printer setup drivers need to turn on the power?
1, click "device" and "printer""2, select "add printer";3, select "add a local printer";4, if you use the USB cable to connect, please select "USB00X", if the use of parallel cable connection, select LPT1";, 5 in the "manufacturer" in the selection of corresponding manufacturers, select the printer model in the "printer", and follow the on-screen instructions to complete the driver installation.
You do not need to turn on the power during the installation step. You need to turn on the power after the installation is successful so that the computer can check the drive and see if the printer is successful.Specific installation steps:1, with the original drive CD-ROM, you can use CD-ROM to install.2, if not to the official website to download the corresponding printer driver,3, use the search wizard and other search matching.
1. connected to the printer, but must not turn on the printer; 2. double click the driver installation files; 3. screen when connected to the printer, turn on the printer, wait; 4. 2-3 minutes after the installation is complete, you can print. If the last step time is unresponsive or prompted manually, most of the printer data lines are not connected properly. At this point, turn off the printer, unplug the data line, reconnect, and reinstall the drive.
Take HP for example. The steps are as follows:1, the printer's USB transmission line connected to the computer, open the printer power supply;2, open the driver wizard;3 Click on "driver" to start automatic detection and retrieval;4, "HP LaserJet 1s012" found, click "install"
