Do the whole wardrobe with more kind board? The height of the space partition? The width between the two vertical plates? Give me some more sizes
Hello, I am doing home improvement, the whole wardrobe is generally used Daixinban 15 per cent do, in the cabinet with wave or other decorative cabinet soundboard, with decorative panels, but the cabinet exterior panels need to paint, general wardrobe gown stay around two meters, about six 860 hang pants in addition, eighty cm space, 6 cm is hanging pants stuff, stainless steel, spacing between the two is generally more than 450 can be, hope to help you, refueling
The whole wardrobe generally used 12-15 thick plywood or MDF cabinet, width 1800mm, melamine decorative panel or cabinet with the Boeing board, the door is push-pull type, in a large and a small distance across the width of the 1100mm, a large segment Aluminum Alloy hanging rod and Aluminum Alloy pants hanging tray, hanging the clothes rod from a trousers tray with high 1050mm, Aluminum Alloy pants hanging tray height 700mm. The small partition is provided with 2 parallel drawers, a single drawer is 120mm high, the drawer bottom is away from the ground, and the height is 800mm. The drawer is provided with an adjustable movable layer frame plate, and the lower space of the drawer is provided with a fixed plywood.
1, sliding door wardrobe: high in the following 2300 can be, frame depth can be controlled at 600, pay attention to the internal structure to be within 100., which is used for sliding door installation. Internal structure can be defined, attention to the size of the drawer, so that the door can not pull after installation. 2, plug-in door wardrobe: high control in 2400, the best, special circumstances can also be heightened, but to do separately. Outside door height control within 1500, width of less than 450, or too big, easy to deformation. 3, enter the room wardrobe: specifications you can control their own, generally unrestricted. All of the above internal structure is too many, not a few words will be able to make it clear.
I am in the cabinet, wardrobe and other panel furniture factory. We mainly melamine sheet based, without painting, a forming. Wardrobe is divided into: sliding doors, wardrobe, plug-in doors, wardrobe, into the room, wardrobe and so on.
