Do you use electric drills or impact drills for ceramic tiles?
After the hole is drawn, the suitable expansion pipe is embedded and the required installation object is fixed with screws.
Select the desired diameter drill mounted on the hammer, vertical alignment punch, giving hammer start the appropriate pressure, feed rate should not be too large, slow awesome can penetrate the tiles. After penetrating the tile, you can force the feed directly to the required depth.
(1) the first to punch tile position mark pen mark position (the best choice of the paste and paste parts), sealing tape.(2) with a hammer and punch (no words can be used in large steel nails, remember to nail, also known as the concrete nail, and not with the nail) out of about 2-3mm in diameter at the marking point, the removal of surface enamel tiles.
It is better to use an electric drill when drilling ceramic tiles, and it is easy to damage the tiles with impact drilling.
