Does fire control room need fire exhaust vent?
Need。 Fire control room, the staff on duty must be heating ah, fire control room must be on the outside wall of the building, the door toward the outdoor, smoke exhaust and exhaust, I think it can be set up can not be set ah.
The smoke vent shall be located on or near the ceiling wall, and the minimum horizontal distance between the adjacent safety exit and the adjacent edge of the walkway shall not be less than 1.50m. The smoke exhaust port located on the ceiling shall not be less than 1.00m of the combustible components or combustibles. The exhaust port is usually closed and a manual and automatic opening device shall be provided.
Precautions for installation of aluminium alloy tuyere of fire exhaust fan1, must ensure that the aluminum alloy tuyere and the box connection gap is well sealed.2, the fin surface cooler and heater with thin aluminum plate manufacturing, easy installation in a large area of touch crooked overlap, so that the air heater can not pass, increase the resistance of the system and reduce the cooling or heating area. Therefore, the lifting and assembly process should be protected. The twisted fin must be adjusted actively.3. When installing multiple parallel surface coolers and heaters, the gap between the surface cooler or heater should be sealed in addition to sealing the gap between the cases.Aluminum Alloy tuyere parts uses high strength aluminum, small volume and beautiful appearance, good structure and convenient movement, heavy lifting platform is stable, convenient operation, and lift Aluminum Alloy air and high safety and reliability. The installation process of high-altitude operation is convenient and fast, can achieve fast, slow walk.
