Does the elevator use fuel rail?
Rail fuel consumption may be serious sticky problems, you can get rid of the middle, and see if there is a problem with the normal operation of the elevator, 17F 2 months plus an oil can
Is your guide oil missing? The fuel consumption of the guide rail is not very strong!
Rail fuel consumption is seasonal, summer high temperature, high oil temperature will rise, oil temperature is high, so some viscosity is very low, it means the thin oil, the oil cup felt much more special, so special oil fee! Thin oil can be seen from the pit can be connected with the oil box, oil box oil may be the cause of dilute oil.In winter the temperature is low and the oil temperature is low, so the oil viscosity is very high. Oil saving in comparison!Therefore, the consumption of oil is mainly caused by the low consistency of the oil. But there are other reasons, such as the cup felt tightness, pine oil suction quickly, then slowly suck tight. Elevator workload!But not only for saving oil and gas saving, but also to learn how to use oil skills. So as to achieve the purpose of fuel-efficient, and the normal operation of the elevator use.Method is as follows: winter oil more concentrated, low oil temperature. The elevator may run because the oil viscosity leads to the increase of the friction between the guide shoe and the guide rail, and the elevator runs with noise and poor sense of comfort. Therefore, winter use oil thin slideway oil.Summer oil is relatively thin, high oil temperature. Sometimes, linoleum can not touch the guide rail, the oil does not take the guide rail, it will streamer. And oil consumption is particularly large, almost every day refueling. Can not keep up with refueling, then there is a big lift in the middle of the sound, due to lack of oil caused. Therefore, the summer selection of a more thick oil.Only in this way can the elevator feel comfortable and fuel efficient!This is some of my personal experience, and I hope to be able to help you!
