Flat solar collector how, flat solar collector working principle introduced

Answer:

pipe installation, not in the structure of the beam column, the seismic wall of the dark column, the end of the pier at the tube. Through the roof, the wall should be timely embedded casing, to avoid the waterproof insulation has been done on the roof hole

Set up reliable lightning protection measures. 5) The storage tank base must be located on the load-bearing wall (beam) of the building and reserved for fixing parts. The gap between the embedded part and the base, the application of fine stone concrete filling dense. 6) storage tank application anchor bolts and foundation connection firmly.

Non-structural force components such as lightweight fill walls shall not be provided with heaters. 2) in the need to do waterproof parts, shall not damage the waterproof layer. 3) The use of bracket installation, should be in accordance with the requirements of the design drawings to check the strength, durability, and the building of the fixed way.

Should pay attention to the following: 1) to install the collector (water heater) on the structure of pre-set embedded parts or fixed bolts, when the collector installed in the masonry wall, the embedded parts should be added to the structural column.

The installation of the system search should ensure safety and functionality while taking into account the combination with the building.