Floor mounted mats are not ordinary plastic films?
In addition, there is also the original pad overlap in 20mm joints, and tape sealing, although also can achieve similar waterproof effect, but the cushion thickness of 2mm or so, the overlap will have high low, easy to produce noise floor installation. The thickness of plastic film is only about 0.1mm, although the overlap will not produce high and low, no effect on the pavement.
Wood flooring, acceptance and use of standard requirements, in the mat below paving a layer of plastic film, seam overlapping 20mm, and tape seal, in the geothermal conditions, even if the tape is moisture degumming, it is difficult to influence the floor, can more effectively prevent the harm of moisture on the floor. Therefore, it is necessary to lay plastic film in the geothermal environment.
But in the damp ground or geothermal conditions in tidal and geothermal temperature (especially geothermal temperature exceed the standard) under the action of the tape is extremely easy to cause the joint degumming, breathable, causing the floor bulge, Alice, sound or color etc.
In accordance with the traditional method of paving, laminate flooring and solid wood flooring installation, the floor below the floor of a layer of thick 2mm or so, the junction with the tape seal, can play a role in moisture.
