Decorate the house. Apply paint with the glue, spread to the tiles, dry for a long time, how can not go, who can think of ways more
You can apply to the above China Resources efficient glue to soften the glue, and then wipe off
Glue is the best way to clean alcohol, the work I often use glue, if there is no glue on the sticky place, with alcohol first wet glue the site, soak for about a minute, and then use your fingers Or other slightly hard things will be large pieces of plastic ticked, and then a small piece of cloth dipped in alcohol can be wiped. Alcohol is usually used in medicine for 95%.
1. With insulating oil, pouring the transformer in the insulating oil on the table, 502 glue quickly become soft, you can quickly rub off the 2. with a sharp blade to scratch the glue should not scratch the paint and then use more than 600 # And then do not use the paint to drop the original 502 to melt the original 502, and then quickly washed off with water, and then wash the water with a clean cotton, 4, acetone solution can wash a small area of ??adhesive 502 glue, as long as the hot water can be soaked, if a large area stained with 502 glue, coated with acetone, about 5 to 10 minutes can be removed. 502 glue is a resin glue, as long as the resin can be dissolved with organic solvents, such as acetone. But inhaled acetone toxic, pay attention to the use of methods, you can put the part of the glue into the bottle. It is said that into the refrigerator in the frozen, glue will fall, you can try a small area of ??adhesive 502 glue, as long as you can soak with hot water, if a large area stained with 502 glue, coated with acetone, about 5 to 10 Minutes can be removed. With the banana water droplets in the glue on the water, while the old toothbrush constantly stirring, until the glue drops soft off, and then clean water, repeated brushing, brush so far. In the presence of glue traces of clothing on the back of the pad of absorbent cloth, and then to the glue traces painted some white vinegar, and finally with cotton dipped in water scrub clean. Recommended acetone, gasoline, sesame oil, etc., pour the transformer in the insulating oil in the hand, 502 glue soon softened, and finally rub off the.
Glue get to the ground to remove the method: 1,100 degrees of water boiled soft, and then flat shovel eradication. 2, alcohol cleaning is the best way, with 95% of the amount of alcohol first wet adhesive site, soak for about a minute, and then use your fingers or other slightly hard things will be ticked, and then a small piece of cloth Dipped in alcohol can be wiped. 3, with the banana water droplets in the glue on the same time with the old toothbrush constantly stirring, until the glue trace soft off, and then clean water, repeated scrub, brush so far.
