GRC light partition board installation scheme for construction of hydropower pipelines
GRC lightweight partition board is a new type of wall material developed in recent years. It can eliminate longitudinal cracks as long as it is built according to the order of requirement and new technology of interlocking joint is applied. Therefore, GRC lightweight partition board is one of the ideal materials for building energy conservation and wall reform, and has been widely used in engineering.
In the installation of water tanks, magnetic pots, electrical switches, sockets, wall lamps and other water appliances, according to the requirements of the size of the chisel hole (not tick), can not use heavy hammer, so as not to shock the wall panels. After the pipeline is buried, immediately cement mortar, putty, plug and scrape. For larger, heavier weight apparatus such as the power box is to cut holes according to size requirements (not, then drove) wedge or steel embedded parts with cement mortar pouring plug, after the installation of 7d.
According to the trend line to determine the position of best hole in the circular hole; second round hole can be used for machinery, or homemade tools through a special hole, the effect is good, the size of the rectangular hole is larger, the machinability, good GRC panel can be cut by the saw, no problem.The GRC wallboard is assembled and assembled by a rabbet groove and can not be transversely laid by the heavy hammer and can not be laid transversely. When construction, the pipeline must be laid from the floor when it is buried. After the line is positioned, dig with a cutting machine. Laying, that is, with concrete mortar, add a proper amount of 107 glue and so on, at the groove to paste glass fiber mesh, with flat, to prevent cracking.
