Hammer head stuck, how to remove ah?
The black hood pressed down, and then press the switch electric drill was rushed out,
This is generally due to the poor quality of the electric hammer drill, inserted into, for a long time, just before deformation, he cannot get out.Method: go to the front of the hammer sleeve, the remaining Quartet set (drill sleeve), with a mallet Percussion Quartet set if not very serious slowly out.Method two: the above method can not be taken out, we have to remove the cylinder, leaving only four sets and stuck bit. It's easier to take it out. If you can't take it out, change it.
Electric tools, electric hammer is a kind of electric drill, mainly used for drilling in concrete, brick and stone on the floor. Professional on the wall, concrete, stone top drilling, and multifunctional electric hammer, adjusted to the proper position with appropriate drill can replace the ordinary electric drill, electric use.The hammer is in drill on the basis of increased by a motor driven piston crankshaft, in a cylinder of reciprocating air, which is in the air pressure in the cylinder cycle changes, changes in air pressure to drive the hammer hit the top of the cylinder reciprocating drill, as if with a hammer percussion drill. Named hammer.
