High-rise building construction with the glass breakage rate for the number of qualified
Not the general steel can be controlled at about 2 percent, the steel will not be more than one percent, which is what I have come into contact with the installation works.
High-rise building glass is generally tempered glass and non-tempered glass two.
The steel will not exceed one percent.
After the steel treatment of the glass surface to form a uniform compressive stress, while the internal formation of tensile stress, so that the glass bending and impact strength can be improved, the strength is about four times more than ordinary annealing glass. Has been treated with a good tempered glass, can not be any cutting, grinding and other processing or damaged, otherwise it will be due to damage to uniform pressure and stress balance "broken body bone."
Non-steel can generally be controlled at about 2 percent.
Non-tempered glass is ordinary glass.
This is what I have come into contact with the installation works.
Texture of tempered glass and non-tempered glass:
1, tempered glass high strength, it is difficult to break; non-tempered glass touch on the broken.
2, tempered glass was broken after the small pieces of nails, are safe glass; non-tempered glass was sharp large, not safe glass.
3, non-tempered glass is very flat; tempered glass has a small deformation.
4, tempered glass with rainbow plaque (special corner), non-tempered glass no; wear polarized glasses to observe: tempered glass with black and white patches, non-tempered glass no.
