the type of heat exchanger is shelltube , 4 tube pass and 1shell pass , cross flow as steam condenser the vapour pass through shell and cold water through tubes ,the number of tubes is 1090 tube and length is 3 meters and cross section area is 18 mellimeter and thickness is 1.5 mm,if cold water entrance is about 27 c and return is 40 c and vapour resulting from ammonium sulphate solution at 74 c and vacum over it (pressure of vapour is 273 mbar ) and vapour under suction by steam ejector the exit temperature of condensed water is unknown to me because it must be as the temperature of vapour but it may be decrease with 2 or more degrees , but condensate tank record temperature of water is about 64 c but it is under atmospheric pressure
I hope that you are not going to try to do this by hand.
Use book Heat Mass Transfer by Kern and TEMA Code( Tubular Exchanger Manufatureres Asso.).
