How can I get the fire signal butterfly valve?
After the switch is closed, the alarm is output through the output module.
Look at the instructions! Will not pick up the sales representative to come to guide!
At the input end of the input module, some resistors or terminals are added to the product
1, the signal butterfly drive by the worm gear drive shaft and butterfly plate rotation, realize the opening and closing and control flow. 2, rotating the handwheel worm gear to the disc to open and close and adjust the flow to the handwheel clockwise rotation for the valve closed. 3, worm gear is arranged in the box body micro switch has two forms: A, in the gear box body is provided with open and close direction two microswitches, respectively, when the valve fully open and close action, connected to the control room "valve open" valve off "light source, the quasi it shows the state of the valve switch. B, in the driving device is arranged in the box body the microswitch (disc position close to 0 degrees), when the butterfly plate from 0 degrees to 40 degrees when the position of a micro switch, the output valve closed signal, 40 degrees to 90 degrees when the position of another pair of normally closed output valve opening signal. A cam that adjusts the touch microswitch and shows the different positions of the disc.
