How can I get the lid on the top of the water fountain?

Answer:

There should be a place beside the lid. It's a little bit concave. From there, you put it into the seam with a knife and pry it up, and the lid comes down.

The cleaning steps of the water dispenser are as follows:1. First open the drain pipe at the back of the water dispenser and drain the remaining water.2, open all the water switch, emptying the remaining water.3, will be used for drinking fountains disinfection decontamination effervescent tablets 1 tablets dissolved in about 2 liters of water, made disinfectant, take some of its disinfectant liquid cleaning water dispenser liner and lid inside and outside side.4. The rest of the disinfectant is filled with the whole cavity. After being detained for 10~15 minutes, the switch of the water dispenser is opened, including a drain pipe and a water switch, and the disinfection solution is discharged.5, with 7~8 liters of water continuous washing water dispenser whole cavity, and wipe with appropriate cleaning cloth, and then open all switches, drain rinse.6. Finally scrub the back wall of the switch with disinfectant, so that the whole disinfection process is completed.

With one caliber and the middle of a small hole, about the size of a stick, or a family tool pliers, one side of the handle into the lid, small mouth about 1 inches, to pry up, you can pry out, very simple;