I am a punk, but my parents dont like it so they took all my punk stuff and now im stuck with all this preppy crap. Any1 got tips on how i can make that stuff fit into my punk image? (this stuff is american eagle, holister, abercrombie, etc. dont have much black left ) plz help me b4 skool starts!
Roller supports are commonly located at one end of long bridges. This allows the bridge structure to expand and contract with temperature changes. The expansion forces could fracture the supports at the banks if the bridge structure was locked in place. Roller supports can also take the form of rubber bearings, rockers, or a set of gears which are designed to allow a limited amount of lateral movement.
If it is a compression fitting it will have threads and a nut on it. When you bought it there should have been a loose brass ferrule in under the nut. You slip the nut over the copper tubing, slide on the brass ferrule, and then tighten down the nut. Two words of warnings when using compression fittings: IMPORTANT!!! (1) Do not overtighten the nut, and even more importantly, (2) once you start tightening the nut, you CANNOT turn the nut the wrong way (as if to loosen it) even very slightly. ALL turning motion must be to tighten only. If you make a mistake and even turn the wrench back 1/4 an inch you can ruin the compression of the ferrule and the fitting will leak and no matter how tight you tighten it after that it will leak. At that point you would have to either cut out the pipe or otherwise remove it and start over.
well all i have to say is to hell with anyone who says lightning never strikes twice this guy was living proof that is false 7 DAMN TIMES?? omg.
