How can I tell if the diesel is loaded in the tank, for example?
In order to ensure the cleanliness of the tank, the tank and the oil system should be cleaned regularly. The inner and outer joints of the oil hose shall be lubricated regularly, so that the disassembly and assembly are easy and convenient. After completion of each time, the oil pipe shall be covered with the outer end cover (Du Gai) and the ends of the oil hose (cover) in time to ensure the cleanliness of the pipe.7, oil loading shall not exceed the rated loading quality. (converted by oil density).8, the valve through the media should not be too dirty, in order to protect the sealing ring, improve the service life of the ball valve, the ball should not be a long time in a semi closed half open state, otherwise it is easy to cause the sealing ring in the valve deterioration, driving handle should be in the closed state.
The use and maintenance of the oil pump shall be carried out in strict accordance with the instructions for use and maintenance.3, the use and maintenance of refueling machines, please strictly follow the instructions for their use, with the car are equipped with instructions.4, the oil out slowly, can not play oil, please check the safety valve, filter network. These should be inspected and cleaned regularly.5 tank and piping systems should be cleaned regularly. Check the connection of the piping system regularly, whether it is well connected and reliable.
The moving part of a tank, the popular term for an automobile chassis. The driver of this piece is more knowledgeable, after installation of oil tanker from engine power installed transmission shaft, PTO, with these 2 devices we need special attention in operation, improper operation of PTO scrapped.
When measuring oil, it shall be carried out in accordance with the relevant provisions. In winter, if there is water in the self-priming pump, the water must be exhausted so as to prevent the pump from breaking.17, when you need to enter the tank work, should pay attention to good ventilation, outside the tank must be protected. Wash the tank with soapy water when necessary.
Should keep the breathing valve clean, so that the breathing valve in the working state, the valve spring shall not be replaced at random, so as not to affect the effect of suction and deflation. When the valve is blocked, there is a risk of tank deformation.11, in order to prevent the occurrence of fire accidents in oil, exhaust pipe, muffler damage, pipeline leak, extremely bad or conductive fracture are not allowed on truck parts with metal objects, so as to avoid the vehicle on Mars, should be ready to fire equipment.12, if the tank under the tank fire shall not be frozen, baking, hot melt or available steam drove into the greenhouse is thawing.13, the gas car before operation, must be used to avoid poles inserted wet land, take the tape should be grounded, should always keep the antistatic good operation process.14. Check the fire extinguisher before starting the vehicle. The service personnel should be familiar with the use of fire extinguishers and check and maintain them according to their instructions.15. Before the operation of the tanker, the pipeline system shall be checked for oil leakage, whether the ground wire is disconnected or the exhaust pipe is damaged, and the problems shall be solved before re operation.
