How can the air-conditioner filter be removed?
Hello! If the air-conditioner is on, pull up the tuyere plastic shield, you can see the filter net, pull up and pull up. Cabinet air conditioning, usually plastic enclosure has a screws, remove the screw lift into plastic enclosure, can see the screen pack up spare can!
Cleaning method: First, remove the filter screen by the instruction manual, and notice that the metal part of the indoor unit is not encountered when disassembling, preventing it from being scratched. Remove the dust from the air and dust the dust with a flick or electric vacuum cleaner. If the strainer mesh dust too much, can rinse with water or soft brush dips in neutral detergent to clean, but not more than 50 ℃ above, when cleaning water temperature can't use washing powder, detergent, gasoline, banana oil, etc., in order to avoid the strainer mesh deformation. In addition, don't use a sponge to clean, otherwise you will damage the surface of the dust screen. 3. Rinse off with clear water, dry with a soft cloth or blow dry, put the shade never exposure in the sun or the fire flame and drying, lest the strainer mesh deformation. When cleaning, apply a soft cloth with warm water or neutral detergent to gently wipe and then dry with a dry soft cloth.
One of the suction plates in the front! Put your hands on both sides of the machine about 5cm or so. There is a push in English that will automatically pop up the board! The machine will be found in the center of the center with a screw on both sides of the center
Is really consider in the design of air-conditioning filter need often clean, so the design of the air conditioning is used the removal and installation structure can be as simple, mainly two kinds: The front panel of the indoor machine opens the design, and the front panel can be lifted to remove the filter and then insert it as it is. This structure, the left and right sides of the front panel, can usually find the hollow of finger force. The front panel is designed as a whole, where you can find the place where the filter is opened, and the general structure is the falcons, which will pop up when pressed.
